Not for those inexperienced in R/C. You must tether with heavy weights before attempting to get this model in the air. It is not as simple as connecting a receiver. With the model tethered establish which two motors are clockwise CW and which two are counter-clockwise. Attach CW props to CW motors and CCW props to CCW motors. The yellow booms signify the front of the drone. IMPORTANT: At least one channel on the Tx will need to be reversed to fly the model. TX sticks need to be toed-out to unlock the motors, push throttle stick very slowly forward within one or two seconds. Still properly tethered down, check forward elevator causes model to bow/rock forward. Check right aileron causes the model to rock/bow to the right. At least one TX channel will need to be reversed! If the motors do not spin up the throttle channel needs to be reversed. Disconnect the drone battery before reversing the throttle channel - keep the drone tethered or it will quickly rise into the air. Once you are confident the model is responding to the TX in the normal manner observe the ultra bright LEDS hanging down below the body of the drone. Flashing white signifies drone has moved whilst tethered (6 axis gyro is working). One Red flash, 9 or more satellites are acquired. Two Red flashes 5 to 8 satellites. Three Red flashes less than five satellites. One Blue flash = Gear position 0, manual hover. Two Blue flashes = Gear position 1, GPS Hold Hover. Gear position 2 is GPS Return. Blue flashes turn Green when number of acquired satellites is high. ONLY FLY FROM A LARGE FIELD. NOT YOUR GARDEN. SERIOUS INJURY AND / OR DAMAGE IS LIKELY.