Beskrivning
Detaljer
Med populär efterfrågan lagrar vi nu en rad ouppbyggda nitroradiostyrda bilsatser för dem som gillar att bygga modeller så mycket som att använda dem! Glöm Lego etc, dessa självbyggande kit ger timmar roligt och när de är färdiga är de verkligen roliga att använda! För timmarna av användning och njutning kommer du att få från första byggnaden och sedan köra dem dessa kit är fantastiskt värde för pengarna. Om du är ny på nitro RC-bilar så köper du ett självbyggande kit är ett bra sätt att lära dig om hobbyen och se hur de fungerar innan du går ut och tävlar dem.
Vi säljer några av dessa modeller till skolor som de är pedagogiska och en bra introduktion till mekanik och teknik. Det finns ingen annan produkt på marknaden som ger så komplett allt i lådan så här. Till skillnad från andra självbyggande kit på marknaden som bara innehåller det grundläggande chassit och ingen av elektroniken etc, innehåller dessa kit allt som behövs för att slutföra och till och med de verktyg du behöver för att bygga dem! SH 18 motor, pistol typ radioutrustning, fett, olja etc - allt finns där. Byggnaden tar cirka 8-12 timmar i genomsnitt och rekommenderas för åldrarna 14+.
Det viktigaste med ett självbyggande kit är bruksanvisningen. Med dessa kit har manualen fått mycket uppmärksamhet för att säkerställa en smidig konstruktion. Det här är en inte en sidor broschyr som med några andra kit, det här är en tjock handbok som konstruerades och skrevs i Storbritannien för att se till att ingenting gick förlorat i översättning på fabriken. Konstruktionen är uppdelad i många steg med varje motsvarande scenens delar förpackade separat som visat ovan. Stegen visas tydligt med CAD 3D-bilder med alla delar märkta individuellt. Slutresultatet är Condor off road buggy. En högkvalitativ offroadmodell som har ett starkt legerat chassi, axeldrivet 4WD-system, oljebelägna stötar, fram- och bakre differentialer och förseglad radioback..
Condor drivs av en Taiwan SH-storlek 18-motor som raketar modellen till över 40mph. Buggy kan uppgraderas med en rad prestanda hop ups tillgängliga från vår webbplats och du kan till och med passa en tvåväxlad växellåda för att göra det ännu snabbare!!
ALLT SOM BEHÖVS FÖR ATT BYGGAS INGÅR
Även verktygen och oljorna.
DETALJERADE STEGVISA INSTRUKTIONER
Manuell skrivet i Storbritannien.
LÄR DIG OM FÖRBRÄNNINGSMOTORER OCH MEKANIK
Utbildning och roligt, som används i skolan som en rolig undervisning.
ÖVER 400 BITAR I TIMMAR AV ROLIG BYGGTID
14 påsar med 14 etapper av spännande upplevelse.
NJUT BYGGA DEN SÅ MYCKET SOM ATT ANVÄNDA DEN
Det är en livstidsupplevelse för barn att montera sin egen nitromodell.
2,4 GHZ RADIOUPPSÄTTNING
Tillåter att flera modeller används i samma område utan störningar.
HALVVÄGS GENOM BYGGNADEN
Bra sätt att hålla barnen förlovade.
KAROSS
Sista steget skuren kroppsskal för att slutföra byggnaden.
BYGG KOMPLETT
Buggy är redo att springa.
Specifikationer & Funktioner
Mer information
Artikelnummer | A3001 |
---|---|
Tillverkare | Acme-Tech |
Skala | 1:10 |
Bygg | Bil Byggsats |
Kör | 4WD |
För Terräng | Off Road |
Radioutrustning | 2.4 GHz |
Typ | Buggy |
Motor | .18 Nitro |
Specifikationer |
|
Egenskaper |
|
Krävs för att använda |
Optional: This model comes with an AA powered glow starter, however the upgrade of a rechargeable Glow Starter Set is available above in Related Products. |
Q&A
Questions:
There are no product questions yet.
Parts & Upgrades
Uppgraderingar
LEVERANS INFORMATION
LEVERANS INFORMATION
Leveranskostnad och tid kommer att bero på storleken på de artiklar som beställts
SKONA DELAR
De kommer att ta mellan 2-5 arbetsdagar. Kostnaden beror på antalet delar och storleken på.
Germany: €3.70 - €7.40
Spain: €7.40 - €13.30
France: €7.40 - €11.80
Ireland: €7.40 - €8.90
Italy: €7.40 - €13.30
Netherlands: €5.95 - €8.99
Portugal: €7.40 - €10.30
Denmark: 42kr. - 72kr.
Sweden: 52.80kr - 105.60kr
NORMAL STORLEK MODELLER
Detta inkluderar inte mycket stora objekt som elektriska cyklar, stora skotrar och quad cyklar. Leverans kommer att ta 2-5 arbetsdagar.
Germany: €7.40
Spain: €9.99
France: €8.99
Ireland: €7.40
Italy: €9.99
Netherlands: €8.99
Portugal: €9.99
Denmark: 72kr.
Sweden: 105.60kr
MYCKET STORA OBJEKT
Mycket stora objekt som elektriska cyklar, stora skotrar och quad cyklar. Leverans kommer att ta 2-5 arbetsdagar.
Germany: €49.90
Spain: €49.90
France: €49.90
Ireland: €49.90
Italy: €49.90
Netherlands: €49.90
Portugal: €49.90
Denmark: 499kr.
Sweden: 499kr.
32 kundomdömen
Fiddly But Fun
Av mark May 24, 2020I bought the self build kit as a joint present for my 13yr, 11yr old sons (and myself) for Christmas. Took us about 3 days, 3 or 4 hours per day off and on to build it together. The boys really enjoyed building it and learning about the differential and how the shocks worked and filled with oil.
Starting the car in December outside was a challenge on account of it being too cold. We found this guide on line which properly explained how the carburetor works and how to set it up https://www.nitrotek.co.uk/blog/2015/12/06/the-definitive-10-step-guide-on-how-to-start-your-nitro-rc-car/ but still struggled. Eventually I found that heating the engine block up with a hair dryer to get it warned up made it easier to get it going and run the engine in.
Once we'd got it going we had to fiddle with a combination of the low idle and throttle adjustment on the controller to prevent it driving off on it's own.
Now in lockdown in spring (bit Warner) it's been great fun getting it going again on a playing fields taking it in turns. It's pretty fast and quite easily copes on a bumpy grassy field bombing around.
All in all if you want a project and are happy to fiddle with it to get it going and are interested in learning about RC cars and how they work then I'd recommend this as a great way to while away many an afternoon with the kids.o
Av Morgan April 16, 2020very good buggy, very fast, much fun making it. a lot of plastic parts.
good for beginners
Av conrad October 26, 2014i got this for my birthday and spent a long weekend building it,the engine was a little hard to start but once it did it was nothing but fun.
Great first time item for newbies.
Av Adam May 07, 2014This is without a doubt a great first time buy for anyone looking to dabble in the world of RC cars. putting it together took around a week and without only a few annoyances where the car nearly met the wall.
Pros:
Great value
good for a project
loads of fun and interaction whilst building it and after
All round a definite buy for first timers like me
Cons:
A lot of the pieces are plastic therefore relatively easy to break when driving it around (I have already had to replace the front suspension with the metal ones as it snapped).
Some extremely fiddly DIY at times where I had to get more than one pair of hands involved to get the job done.
Been running it now for nearly 6 weeks and I found the engine is a bit fiddly to find that sweet spot. I am still playing around with it and it is getting a tad annoying as its not as simple as starting it up, having a 5 - 10 minute fiddle then off you go. If the carburettor isn't set properly then it will either die after a few seconds or the car will want to go before you even get your finger on the accelerator, which brings me onto the carburettor. I am now experiencing problems with the screw holding the air cover in place meaning I have no way of setting the carburettor correctly until I resolve this...which I will.
So in summary; a great buy, just what I wanted (something fiddly, and time consuming with a lot to get out of it), a way to get slightly more mechanically minded, a long term hobby, but one that I would recccomend upgrading certain parts of, i.e plastic suspension to metal etc.
I highly recommend it but if your looking for something a bit more reliable I would go for the already built models.
Don't let the little issues put you off, after all, there are going to be set backs and if it wasn't the way it was then it wouldn't be worth it. You wouldn't discard your car if it suddenly annoyed you for any small or large reason.
NITROTEK SAYS - Thanks for the great review. If you are having to adjust the carb before each use it means that probably one of your screws on the engine or exhaust are loose. Because if there is a loose screw then air starts to get into the engine which messes the settings up. Tighten the loose screw and then no air can get in so the carb settings will stay the same.jolie
Av jojo14op May 07, 2014super très intérésant
Skriv din egen recension
Endast inloggade kunder kan skriva recensioner. Vänlige logga in eller registrera dig